Advertisement
Quick Links
Advertisement
Related Manuals for HK Audio ACTOR DX
Summary of Contents for HK Audio ACTOR DX
- Page 1 Manual 1.2 English Deutsch Français Español...
- Page 2 Bitte vor Gebrauch lesen und für späteren Gebrauch aufbewahren! • The unit has been built by HK AUDIO ® in accordance with IEC 60065 and left the • Das Gerät wurde von HK AUDIO ® gemäß IEC 60065 gebaut und hat das Werk in si- •...
-
Page 3: Table Of Contents
Thank you for choosing an HK AUDIO product. free of charge! Use the convenient online registration option at ACTOR DX consists of two ADX 112 A mid/high units www.hkaudio.com. loaded with a 12" woofer, 1. 4" driver and a DDO™... - Page 4 7.5° and 15° angles of tilt, enabling perfect mid/high perfectly matched components. Painstaking effort unit-to-audience alignment. Troublesome ceiling was invested in ensuring ACTOR DX can be trans- reflections are minimized, making the sound clearer, ported easily and set up quickly. Handling and EQing tighter, and more focused.
-
Page 5: Actor Dx System Components
ADX 115 Sub A Subwoofer with active systems where signals are routed via The ACTOR DX A Sub’s housing is split up into two paralleled pass-through jacks, which would allow chambers. The front chamber serves as the speaker connections to be made in any sequence. - Page 6 Can I connect speakers other than an ACTOR DX operated in the indicated configuration only. Using mid/high unit to an ACTOR DX Sub A or Sub B other mid/high units can degrade the sound and subwoofer? damage the power amp (e.g.
-
Page 7: Connections And Control Features
(master left/right, line out, or a consumers (for example, another ACTOR DX mid/ similar circuit) to the balanced inputs using a mic high unit or an ACTOR DX Sub A bin) to it. cord equipped with XLR connectors. Ensure XLR connectors are wired as follows: Heads up: The Powercon Link socket can handle 1= ground, 2= +, 3= -. - Page 8 2 mid/high units, 2 Sub A+ Sub B 7 Dual Stack Band 2 mid/high units, 2 Sub A + Sub B 15 Rigging Points Attach the ACTOR DX rigging frame here to fly the L Locked buttons are disabled mid/high unit from a truss or similar suspension...
-
Page 9: Tips And Tricks
Connecting cords: Use this parallel Speakon ® out- be cleaned up by backing off the Gain knob. put to connect a passive ACTOR DX B Sub bin. Avoid ground loops! You may encounter a ground Note: Be sure to twist the Speakon“ connectors loop when the mixer is grounded via a mains cord clockwise until they lock in place! You must first... -
Page 10: Actor Dx Accessories
Set Sub A’s volume to the desired level using the HK AUDIO ACTOR DX Tilt-Unit Subwoofer Level. Designed to hold the ACTOR DX mid/high unit, 2 Check if the system configuration "Top Only" is the tilt unit is placed on the subwoofer, with the selected on the system controller. -
Page 11: Technical Specifications
1.4" Directivity: 60° x 40° CD horn Crossover frequency: 950 Hz, 12 dB/octave Pole mount: HK AUDIO DuoTilt™, 36 mm, 7.5°, 15° Rigging points: 4 M10 threaded bushings for attaching an optional rigging-bra- cket Accessories: ACTOR DX Tilt-Unit, 7.5°, 15°... - Page 12 This is to certify that HK AUDIO ® ACTOR DX ACTOR ADX 115 Sub A Connections: 1x XLR Subwoofer Input 1x XLR Subwoofer Through complies with the provisions of the Directive of 1x Speakon ® Parallel Out the Council of the European Communities on Subwoofer Input: XLR female (pin 1= Ground;...
- Page 13 HK Audio ® • Postfach 1509 • 66595 St. Wendel Germany • info@hkaudio.com • www.hkaudio.com Technische Änderungen vorbehalten International Inquiries: fax +49-68 51-905 215 Copyright 2008 Music & Sales GmbH • 02/2008 international@hkaudio.com...
Need help?
Do you have a question about the ACTOR DX and is the answer not in the manual?
Questions and answers