Advertisement
Magnetic Lock Wiring Instructions
A terminal block is provided for wiring the maglock to the power supply.
Set jumpers properly for 12VDC or 24VDC operation.
*
(Cover all 4 pins = 12V - Cover 2,3 middle pins = 24V)
Connect the ground lead from a DC power source to the (-) terminal.
Connect the positive lead from a DC power source to the (+) terminal.
Current Draw: 500mA @ 12VDC, 250mA @ 24VDC nominal
The magnet mounts to the door frame. The armature plate mounts to the door with hardware kit provided.
To remove the mounting plate from the magnet it is necessary to remove the two Phillips head screws on
the left and right side on the face of the magnet.
Use supplied template and follow installation instructions with the door in its closed position.
Apply screw locking agent to all screws.
Magnetic Lock Installation Instructions
Filler Plate
Advertisement
