Software Installation - VTech Secret Safe Diary Visual User Manual

SOFTWARE INSTALLATION

Before you can connect the VTech
your computer, you need to install the Learning Lodge
VTech
website.
®
To begin the software installation, please go to
www.vtech.co.uk/download to download the setup file.
Once the setup process is complete, connect your VTech
Safe Diary Visual to your computer using the USB cable. Locate and
connect the USB cable to the USB port on the top of your device, then
plug the other end of the USB cable into your computer's USB port.
Note:
1. If the power supply is interrupted during the transfer of data to
and from the VTech
VTech Secret Safe Diary Visual may be lost. Before connection,
®
please check and make sure that your batteries are not running
low on power.
2. Refrain from unplugging the USB cable during the transfer of data
to and from the VTech
in the loss of data.
3. If the VTech
connected properly, you will see this picture
shown on the screen of your VTech
Safe Diary Visual. You will be taken directly
to the VTech
section on the VTech
where you can enjoy all the online features.
4. You can view photos in the folder VTech 1402 and back them up
by copying the files in this folder to your computer.
The toy is only to be connected to equipment of Class II (marked on
the equipment with this symbol
Secret Safe Diary Visual, the data on the
®
Secret Safe Diary Visual. This may result
®
Secret Safe Diary Visual is
®
Secret Safe Diary Visual
®
Learning Lodge
®
Secret Safe Diary Visual to
®
Secret
®
,
TM
).
from the
TM
Secret
®
19