Software Installation - VTech Little SmartTop Parents' Manual

SOFTWARE INSTALLATION

Before you can connect the Little SmartTop to your computer,
you need to install the VTech
computer. To obtain the VTech
VTech Little SmartTop download site on http://www.vtechuk.com/
®
download and download the setup file.
Once the setup process is complete, connect the VTech
SmartTop to the computer using a USB cable. Locate the USB
port on the left side of your product, and plug the device into your
computer's USB port.
Note:
1. If the power supply is interrupted during the transfer of data to the
VTech Little SmartTop, the data on the VTech
®
may be lost. Before connection, please check and make sure that
your batteries are not running low on power.
2. Refrain from unplugging the USB cable during the transfer of data
to the VTech
abnormally or be lost.
3. If having problems with downloading any content, please reset the
unit by pressing the ON/OFF button while holding the f & r buttons.
NOTE: This will delete all your downloads and require you to create a
new user ID when connecting to the VTech
If the VTech
®
properly, you will see this picture shown on the
screen of your VTech
will be taken directly to the VTech
Lodge ™ website, where you can enjoy all of the online features.
®
Little SmartTop. This may cause the data to transfer
®
Little SmartTop is connected
Little SmartTop. You
®
Learning Lodge ™ software on your
Learning Lodge ™ , please go to the
®
Learning Lodge ™ .
®
Learning
®
Little
®
Little SmartTop
®
11