Hardware Installation - Nokia G-140W-C User Manual

LAN1/2/3/4
RESET
WPS
WLAN
POWER
ON/OFF
OPTICAL
LED

3.2 Hardware Installation

3.2.1
Mounting the G-140W-Cindoor ONT on the desk
 allow a minimum 100 mm clearance above the top cover
allow a minimum 50 mm clearance from the side vents
do not place any heat source directly above the top cover or belowthe
bottom cover
3.3 Cable Connections and Login
 RJ45Ethernet Interfaces (LAN1/2/3/4)
Connect the computer network interface or other network devices
(such as Ethernet switch, IPTV Set-Top-Box) to the Ethernet LAN
ports of the G-140W-Cusing a RJ45 cable. The 4 LAN ports are
10/100/1000M Ethernet interface. It auto senses the Ethernet
interface speed to 10Mbps, 100Mbps or 1000Mbps.
 RJ11 Voice Interface(TEL)
Connect the telephone set or Fax machine to the TEL ports of the
G-140W-Cusing a RJ11 cable. The TEL1 ports are FXS interfaces
providing services to voice and/or fax devices.
PON Broadband Interface (OPTICAL)
RJ-45 10/100/1000M Ethernet Port: Connect Local
Network device (PC, STB)
Factory Resetbutton. Press and hold the button for 10
seconds or more to restore the device to the factory
defaults.
This button turnsWIFI WPS on.
This button turnsWIFIon or off
Power connector.Used to connect the external power
adapter
Power On/Off
SC/APC Fiber Optic connector for PON Interface
1st press: Power LED is solid Green. Turn off the other
LEDs.
2nd press: turn on all LEDs (back to normal)
- 6 -