Troubleshooting - Nokia G-140W-C User Manual

Connect the Fiber Interface point provided by the Broadband
Internet Services Provider to the OPTICAL port of the
G-140W-Cusing a single mode fiber optics cable with a SC/APC
connector. There is a cover to protect the optical port. Remove the
cover before making the connection.
Power Interface (POWER)
Connect the power adapter provided in the package to the POWER
connector of the G-140W-C. Connect the power adapter to the
power socket. Press the ON/OFF button. Ensure the power LED
indicator is on.
 Login to the WEB Graphical User Interface
IP address: 192.168.1.1
User name: admin
Password: admin

3.4 Troubleshooting

Problem
POWER LED is off
LINK LED is off
LAN1-4 LED is off
TEL1 LED is off
WPS LED is red
WLAN LED is off
Possible Solutions
Check if the power on/off button is in the ON
position
Check if the power adapter is properly
connected to the G-140W-C
Check if the fiber optic cable is properly
connected at both ends
Check if proper RJ45 Ethernet cable is used
Check if the RJ45 cable is properly connected at
both ends
Check if the network interface on the computer
or network device is functioning properly
Check if the RJ11 cable is properly connected at
both ends
Check if the telephone set is in off hook status
Check if the button is pushed and the wireless
adapter's WPS button is also pushed.
Check if the WLAN is properly disabled on web
GUI or the WLAN button is pushed.
- 7 -