Niigata seiki BB-180A Instruction Manual

BEVEL BOX
Thank you for purchasing the Bevel Box Digital Angle Meter.
Please read this manual thoroughly before use for proper operation.
■ PART IDENTIFICATION
[ HOLD ] Button
[ ON/OFF ] Button
Battery Cover
INSERTING BATTERY
Rotate Cover in direction
of arrow to open. Insert
CR2032 Lithium Battery
with ( + ) side outward and
replace cover.
Measurement Surface
■ HOLD FUNCTION
Press [ HOLD ] to freeze the value on the display.
Press [ HOLD ] a second time to release.
Press [ HOLD ] Button
LCD Display
[ ABS/ZERO ] Button
【Front】
【Rear・Bottom】
Magnets
Display value is held
Digital
Angle Meter
■APPLICATIONS and FEATURES
●
Precision angle measurement and
working reference for assembly of
machinery, tooling, jigs, etc.
●
Magnetic base
●
In Relative Mode, Zero-point can be set
at any position.
●
Origin can be set and stored for use in
Absolute Mode.
●
Hold function to freeze display.
● Auto Power Off feature ( approx. 5 minutes. )
■SPECIFICATIONS
Model No.
Measurement Range
Resolution
Accuracy
Repeatability
Operating
Temperature Range
Weight
Power Supply
Accessories
Measurement Modes
CAUTION
●
This is a precision instrument - Handle
With Care. Do not drop or subject to
shock.
●
Do not shake or rotate violently. Internal
components can not respond to rapid
motion and zero-point may shift.
If subject to abrupt motions, please
reset zero-point using procedure
described in Setting the Zero-point
or Setting the Origin sections.
●
Do not engrave or mark with electric pen.
●
Do not use or store in places subject to
extreme temperate fluctuations, direct
sunlight, dusty locations, or locations
that are wet or have high humidity.
INSTRUCTION MANUAL
Model No.：BB-180A
BB-180A
±180.0°
0.1°
±0.2°
0.1°
approx.5 ∼ 45℃
approx.170g
CR2032 Lithium Battery ( 1× )
・Storage Case
・CR2032 Lithium Battery
Absolute, Relative
( for test )