Beko MWOTR 30100 SS Installation Manual page 15

Installation
5
Plate position—beneath framed recessed
cabinet bottom
NOTE: IT IS VERY
READ AND FOLLO IMPOR
IN THE INSTA W THE TANT TO
BEFOR LLATIO DIREC TIONS
REAR E PROC EEDIN N INSTR UCTIO
WALL TEMPL G WITH NS 3/8" TO EDGE
This Rear Wall Template ATE. THIS
mounting outlet. plate and serves 12"
1. Use to locate the horizonta to position the bottom
accuratel a level to check l exhaust
2. Locate y. that the template
right side and mark at least is positione d
of the centerline one stud on the left 4"
screw mounted It is important . or
of the microwav firmly in to use at least one
locations e. Mark two additiona a stud to support wood
3. Drill holes for the supplied toggle bolts. l, evenly the weight
a stud, drill a 3/16" in the marked locations spaced
that do not line hole for . Where there is
toggle bolts. up with a stud, wood screws. For holes
DO NOT drill 5/8" holes for
AT THIS TIME. INSTALL THE MOUNTI
4. Remove the template NG PLATE
5. Review the Installatio from the
installatio n situation. n Instructio rear wall.
n book for your
Darle vuelta a la hoja
versión en Español para consulta
. r la
Locate
and mark
mounti ng plate. holes to align with
IMPOR holes in
TANT: the
LOCAT E AT LEAST
THE CENTE ONE STUD
MARK RLINE . ON EITHE
THE LOCAT R SIDE
SPACE D TOGG ION FOR OF
AREA. LE BOLTS 2 ADDIT IONAL
IN THE , EVENL
MOUN TING PLATE Y
Trim the rear wall
templa
te along the dotted
line.
Locate
mounti and mark holes to
ng plate.
IMPOR TANT:
LOCAT
E AT LEAST
THE CENTE ONE STUD
MARK RLINE .
SPACE THE LOCAT
D TOGG ION FOR
AREA. LE BOLTS
C L
Draw a vertical line on the wall at the center of the
30 space.
ʺ
Tape the Rear Wall Template onto the wall
matching the centerline and touching the bottom
cabinet frame.
Plate position—beneath recessed bottom
cabinet with front overhang
NOTE : IT IS
READ AND FOLLO VERY IMPOR
IN THE W THE TANT TO
BEFO INSTA LLATIO DIREC
REAR RE PROC EEDIN N INSTR TIONS
WALL TEMP G WITH UCTIO NS
This Rear Wall Template LATE. THIS 3/8" TO EDGE
mounting plate and serves 12"
1. Use outlet. to locate the horizonta to position the bottom
accurate a level to check l exhaust
2. Locate ly. that the template
right side and mark at least is positione
of the centerlin one stud on the d 4"
screw mounted It is importan e. left or
of the microwa firmly in t to use at least one wood
locations ve. Mark a stud to support
3. Drill holes in for the supplied two additiona l, evenly the weight
a stud, drill a 3/16" the marked toggle bolts. spaced Trim the
that do not line hole for locations . Where rear wall
toggle bolts. up with a stud, wood screws. For holes there is templa te along
DO NOT drill 5/8" holes for the dotted
AT THIS TIME. INSTALL THE MOUNTI
5. Review 4. Remove the template NG PLATE
the Installatio from the
installatio n situation n Instructio rear wall.
. n book for your
Darle vuelta a la hoja
versión en Españo para consulta
l. r la
Locate
and mark
mount ing plate. holes to align with
IMPOR holes in
LOCA TANT: the
TE AT LEAST
THE CENT ONE STUD
MARK ERLIN E. ON EITHE
SPAC THE LOCA R SIDE
ED TOGG TION FOR OF
AREA . LE BOLTS 2 ADDIT IONAL
IN THE MOUN , EVEN LY
TING PLATE
Trim the
rear wall
templa te along
the dotted
line.
Locate and mark
mount ing plate. holes to
IMPOR align with
TANT: holes in the
LOCA TE AT
THE CENT LEAST ONE STUD
MARK ERLIN ON EITHE
THE LOCA E. R SIDE
SPAC ED TOGG TION FOR OF
AREA LE BOLTS 2 ADDIT
. IN THE IONAL , EVEN
MOUN TING PL LY
Your cabinets may have decorative trim that inter-
feres with the microwave installation. Remove the
decorative trim to install the microwave properly
and to make it level
Over The Range Convection Microwave Oven / Installation Manual
Trim the
rear wall
templa te along
the dotted
line.
align with
holes in
the
ON EITHE
R SIDE OF
2 ADDIT
IONAL
IN THE MOUN , EVENL Y
TING PLATE
33 to Cooktop
ʺ
Draw a line on the
back wall equal to the
depth of the front
overhang.
line.
READ NOTE: IT IS VERY
IN THE INSTALLAT AND FOLLOW IMPORTAN THE DIRECTION T TO
BEFORE REAR WALL PROCEEDI ION INSTRUCTI S
This Rear mounting Wall Template TEMPLATE NG WITH . THIS ONS 3/8" TO EDGE
1. Use outlet. plate and to locate serves the horizontal to position the bottom 12"
accurately. 2. Locate a level to check that the template exhaust
right side of the centerline. and mark at least one stud on the is positioned 4"
of the microwave. screw mounted It is important firmly in to use at least left or
locations 3. Drill holes in for the supplied Mark two additional, a stud to support one wood the weight
a stud, that do drill a 3/16" the marked hole for locations. toggle bolts. Where evenly spaced Trim the rear wall
toggle bolts. not line up with a stud, drill 5/8" wood screws. there is For holes template along the dotted
4. Remove AT THIS DO NOT TIME. INSTALL THE MOUNTING holes for line.
5. Review installation the Installation the template from the Instruction rear wall. PLATE
situation. book for your
versión Darle vuelta a la hoja
en Español. para consultar la
Locate and mark
mounting IMPORTAN plate. holes to align with holes in
LOCATE AT LEAST T: the
THE CENTERLIN MARK ONE STUD E. ON EITHER
SPACED THE LOCATION FOR 2 SIDE OF
AREA. TOGGLE BOLTS IN THE ADDITIONA L, EVENLY
MOUNTING PLATE
Trim the rear wall template
along the dotted
line.
Locate mounting and mark holes to
IMPORTAN plate. align with holes in
LOCATE AT LEAST T: the
THE CENTERLIN MARK E. ONE STUD ON EITHER
SPACED THE LOCATION TOGGLE FOR 2 SIDE OF
AREA. BOLTS IN THE ADDITIONA MOUNTING L, EVENLY
PLATE
C L
33" to Cooktop
The microwave must be level.
Use a level to make sure the cabinet bottom is lev-
el.
If the cabinets have a front overhang only, with
no back or side frame, install the mounting plate
down the same distance as the front overhang
depth. This will keep the microwave level.
1. Measure the inside depth of the front overhang.
2. Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
3. For this type of installation with front overhang
only, align the mounting tabs with this
horizontal line, not touching the cabinet bottom
as described in subtitle 5.1.4.
15 / 32 EN