Onkyo TX-RZ830 Instruction Manual page 7

1. ON/STANDBY button
2. PURE AUDIO button/indicator: Switches to the Pure Audio mode. (
3. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the
functions such as HDMI Standby Through and Network Standby that work in
standby are enabled.
4. Display ( p8)
5. Remote control sensor: Receives signals from the remote controller.
• The reception range of the remote controller is within a distance of approx.
16´/5 m, and an angle of 20° in vertical direction and 30° to right and left.
6. Input selector buttons: Press the following buttons to switch the input to be
played. The jack allocated to the buttons at the time of purchase, etc. are
shown inside the parentheses ( ).
BD (BD/DVD)
CBL (CBL/SAT)
GAM (GAME)
STM (STRM BOX)
PC (PC)
AUX (AUX INPUT HDMI)
7. ZONE 2/ZONE 3 button: Controls the multi-zone function. (
OFF button: Switches the multi-zone function off. (
8. MASTER VOLUME
9. Press the LISTENING MODE button (above) to select a category from "Movie/
TV", "Music" and "Game", and then turn the LISTENING MODE dial (below) to
change the listening mode. ( p105)
10. You can adjust the sound quality of the speakers. Press the TONE button
(above) to select an item to adjust from "Bass" and "Treble", and turn the
TONE dial (below) to adjust. (
11. Front flap
12. SLEEP button: Sets the sleep timer. Select the time from "30 min", "60 min"
and "90 min". ( p104)
13. PHONES jack: Connect headphones with a standard plug (ø1/4"/6.3 mm).
14. MUSIC OPTIMIZER button: Turns on/off the MUSIC OPTIMIZER function that
improves the quality of the compressed audio.
15. HDMI OUT button: Select the HDMI OUT jack to output video signals.
( p128)
16. INFO button: Switches the information on the display. (
CD (CD)
TV (TV)
PHN (PHONO)
TUN: AM/FM Radio
NET: Playing the Internet Radio, USB, etc.
: BLUETOOTH function
p101)
p101)
p103)
p106)
Contents Connections
≫
17. SETUP button: You can display advanced setting items on the TV and the
p109) display to have a more enjoyable experience with this unit. (
18. QUICK MENU button: Pressing this button during playback can make settings
such as "Tone" and "Level" quickly on the TV screen while playing.
19. Cursor buttons (
cursors, and press ENTER to confirm your selection. When using TUNER, use
them to tune in to stations. (
20. RETURN button: Returns the display to the previous state while setting.
21. DIMMER button: Switches the brightness of the display with three levels. It
cannot be turned off completely.
22. MEMORY button: Used to register AM/FM radio stations. (
23. AUX INPUT HDMI jack: Connect a video camera, etc. using an HDMI cable.
( p65)
24. SETUP MIC jack: Connect the supplied speaker setup microphone. (
25. TUNING MODE button: Used to switch between automatic tuning and manual
tuning for AM/FM stations. (
26. WHOLE HOUSE MODE button: Enable the WHOLE HOUSE MODE function
to play the same source in all rooms that are multi-zone-connected. (
7
Front
Playback
≫
/ / / ) and ENTER button: Select an item with the
p93)
p93)
Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
p125)
p95)
p157)
p102)