Onkyo TX-RZ830 Instruction Manual page 155

• When "Completed!" is displayed, the update is complete.
8. Disconnect the USB storage device from the unit.
9. Press ON/STANDBY on the main unit to turn the unit into standby mode.
The process is completed, and your firmware is updated to the latest version.
• Do not use on the remote controller.
If an Error Message is Displayed
If an error occurs, "- Error!" is displayed on the display of the unit. (""
represents an alphanumeric character.) Refer to the following descriptions and
check.
Error Code
• -01, -10:
The USB storage device cannot be recognized. Check if the USB storage
device or USB cable is securely inserted to the USB port of the unit.
Connect the USB storage device to an external power source if it has its own
power supply.
• -05, -13, -20, -21:
The firmware file is not present in the root folder of the USB storage device, or
the firmware file is for another model. Retry from the download of the firmware
file.
• Others:
After removing the power plug once, insert it to the outlet, and then start the
operation from the beginning.
Contents Connections
≫
155
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫