Samsung SyncMaster 1100MB Manual page 48

The screen colors
have changed after
changing the video
card.
There is a message
that reads
"Unrecognized
monitor, Plug & Play
(VESA DDC) monitor
found".
Check when
MagicTune does not
function properly.
MagicTune™ doesn't
work properly.
Visit the MagicTune™ website and download the installation software for MagicTune™
MAC.
Check the following items if there is trouble with the monitor.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an after-service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed adapter (video)
driver and the monitor driver.
4. Check if the scanning ratio of the video screen is set at 50Hz or 160 Hz .
(Do not exceed 60Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter at the "Control Panel→System→Device Administrator" and then
reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur,
Q & A
Question
How can I change the
frequency?
How can I adjust the resolution?
Display → Settings.
Has the video card Set the video card by referring to the video card
been set properly? manual.
Have you installed Install the monitor driver according to the
the monitor driver? Installation
See the video card Install the monitor driver according to the
manual to see if the Installation
Plug & Play (VESA
DDC) function can
be supported.
MagicTune feature * To check whether your PC is available for
is found only on PC MagicTune feature, follow the
(VGA) with Window steps below (When Windows is XP);
OS that supports
Control Panel -> Performance and Maintenance ->
Plug and Play.
System -> Hardware -> Device Manager ->
Monitors -> After deleting Plug and Play monitor,
find 'Plug and Play monitor' by searching new
Hardware.
MagicTune is an additional software for the
monitor. Some graphic cards may not support your
monitor. When you have a problem with the
graphic card, visit our website to check the
compatible graphic card list provided.
http://www.samsung.com/monitor/magictune
Have you changed Download the latest program. The program can be
your PC or video downloaded
http://www.samsung.com/monitor/magictune.
graphic card?
contact an authorized service
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)
Windows ME/XP/2000 : Set the resolution at the Control
Panel→Display→Settings.
* Contact the video card manufacturer for details.
Instructions.
Instructions.
center.
Answer
Driver
Driver