Table of Contents
Advertisement
2.
Exit button [ ]
3.
Adjust buttons
[
] / [ ] / [ ]
4.
Menu button [ ]
5.
Power indicator
6.
Power button [ ]
See
PowerSaver
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
1.
Power port
2.
Signal port
3.
BNC Connectors
See
Connecting the Monitor
Use this button for Exit the active menu or the OSD.
These buttons allow you to highlight and adjust items in the
menu.
Adjust Brightness and Contrast.
Use this button for open the OSD and activate a highlighted
menu item.
This light glows green during normal operation, and blinks green
once as the monitor saves your adjustments.
Use this button for turn the monitor on and off.
described in the manual for further information regarding power saving
Connect the power cord for your monitor to the power port on
the back of the monitor.
Connect the signal cable to the 15-pin, D-sub connector on the
back of your computer.
Connect the signal cable to the BNC signal port on the back of
your monitor.
for further information regarding cable connections.
Hide quick links:
Advertisement
Table of Contents
