Hoffer Flow Controls CAT1 User Manual page 3

NOTICE
HOFFER FLOW CONTROLS, INC. makes no warranty of any kind with regard to
this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
This manual has been provided as an aid in installing, connecting, calibrating, operating,
and servicing this unit. Every precaution for accuracy has been taken in the
preparation of this manual; however, HOFFER FLOW CONTROLS, INC. neither
assumes responsibility for any omissions or errors that may appear nor assumes
liability for any damages that may result from the use of the products in accordance
with information contained in the manual.
HOFFER FLOW CONTROLS' policy is to provide a user manual for each item
supplied. Therefore, all applicable user manuals should be examined before
attempting to install or otherwise connect a number of related subsystems.
During installation, care must be taken to select the correct interconnecting wiring
drawing. The choice of an incorrect connection drawing may result in damage to the
system and/or one of the components.
Please review the complete model number of each item to be connected and locate the
appropriate manual(s) and/or drawing(s). Identify all model numbers exactly before
making any connections. A number of options and accessories may be added to the
main instrument, which are not shown on the basic user wiring. Consult the appropriate
option or accessory user manual before connecting it to the system. In many cases, a
system wiring drawing is available and may be requested from HOFFER FLOW
CONTROLS.
This document contains proprietary information, which is protected by copyright.
All rights are reserved. No part of this document may be photocopied, reproduced,
or translated to another language without the prior written consent of HOFFER
FLOW CONTROLS, INC.
HOFFER FLOW CONTROLS' policy is to make running changes, not model
changes, whenever an improvement is possible. This affords our customers the
latest in technology and engineering. The information contained in this document is
subject to change without notice.
Direct all warranty and repair requests/inquiries to the Hoffer Flow Controls
Customer Service Department, telephone number (252) 331-1997 or 1-800-628-
4584. BEFORE RETURNING ANY PRODUCT(S) TO HOFFER FLOW
CONTROLS, PURCHASER MUST OBTAIN A RETURNED MATERIAL
AUTHORIZATION (RMA) NUMBER FROM HOFFER FLOW CONTROLS'
CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING
DELAYS). The assigned RMA number should then be marked on the outside of the
return package and on any correspondence.
FOR WARRANTY RETURNS, please
have the following information available
BEFORE contacting HOFFER FLOW
CONTROLS:
1. P.O. number under which the product
was PURCHASED,
2. Model and serial number of the
product under warranty, and
3. Repair instructions and/or specific
problems relative to the product.
HFC 9708
Return Requests / Inquiries
FOR NON-WARRANTY REPAIRS OR
CALIBRATIONS, consult HOFFER FLOW
CONTROLS for current repair/ calibration
charges. Have the following information
available BEFORE contacting HOFFER
FLOW CONTROLS:
1.
2.
3.
P.O. number to cover the COST of the
repair/calibration,
Model and serial number of the product
and
Repair instructions and/or specific
problems relative to the product.