Signing Out Of Wifi (Reset To Factory Settings) - Miele DA 6498 W Operating And Installation Instructions

Before using for the first time
 Start the WiFi connection on your
WiFi router.
When successfully connected, 2 and 3
will light up constantly.
 Quit connection mode on the
ventilation hood by touching the
delayed shutdown control .
The ventilation hood can now be
operated via the app.
If the connection fails, you have
probably not connected WPS to your
router quickly enough. Repeat the steps
above.
Tip: If your WiFi router does not support
WPS, please connect via the
Miele@mobile app.
20
Signing out of WiFi (reset to factory
settings)
To set up a new WiFi connection, the
existing WiFi connection must be
disconnected.
 Switch the ventilation hood off.
 Press and hold the 1 control.
 Touch the lighting control  at the
same time.
With an existing WiFi connection, 2 and
3 will light up constantly.
The ventilation hood is ready for
disconnection during the next two
minutes.