Table of Contents
Advertisement
After cleaning
After cleaning, leave the filters on an
absorbent surface to dry.
When removing the panel and grease
filter for cleaning, also clean off any
residues of oil or fat from the now
accessible parts of the casing to
prevent the risk of these catching fire.
Replace the grease filter, making sure
that the locking clip is facing
outward.
If the filter has been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
Cleaning and care
Hook the panel in at the top and then
push it into position at the bottom.
Resetting the filter saturation
indicator for the grease filters
Once cleaning is complete, the filter
saturation indicator must be reset.
While the blower is turned on, touch
the grease filter control for approx.
3 seconds, until only the 1 is flashing.
The grease filter symbol goes out.
When cleaning the grease filter before
the full operating time has elapsed:
Touch the grease filter control for
approx. 6 seconds, until only the 1 is
flashing.
39
Hide quick links:
Advertisement
Table of Contents
