Lithium Roll Cart; Storage And Downtime Maintenance; Buttons Under Lid - GOAL ZERO YETI 3000 Lithium User Manual

Using your Goal Zero Yeti

Buttons Under Lid:

Pressing the WiFi button will activate the Yeti's WiFi for connection to a device. For
information on connecting your device to the Yeti, see the included Yeti App Start Up
Guide.
Pressing and holding the RESET button will reset the WATT HOUR output counter.state
of charge percentage and the Time to Empty/Full.
Reset button
Goal Zero Yeti Lithium Roll Cart
The Yeti Roll Cart comes pre-installed on the Goal Zero Yeti 3000 and can be easily
removed when needed.
1. Lay the entire unit on its backside with the outputs of the Yeti facing up.
2. Remove the 4 screws holding the Yeti to the roll cart.
3. Carefully lift the Yeti off the cart.
The included handle is telescoping and can slide up and down while pressing down on
the button.
8
Having your Goal Zero Yeti connected to a power source, like a solar panel or wall plug,
between adventures or while in storage keeps its battery healthy and topped off. This
prolongs battery life and will ensure your Goal Zero Yeti is charged and ready to go all
day, every day.
If you can't keep your Goal Zero Yeti plugged into a power source during storage,
fully-charge your Goal Zero Yeti every 3 months and store it in a cool, dry place.
Failure to maintain your Goal Zero Yeti by following these steps can result in battery
damage which will void the product warranty.
WiFi button

Storage and Downtime Maintenance

9