GOAL ZERO Yeti 400 User Manual

YETI
SOLAR GENERATOR
User Guide
• Register your product
• Watch demo video
• Download user manual
Contact Us:
Toll Free: 888-794-6250
675 West. 14600 South
Bluffdale, UT 84065
www.GOALZERO.com
We proudly support Tifie Humanitarian
www.tifie.org
Technical Specifications General
Charge Times Shelf Life
Charging With: Approximate Charge Times Chainable
Wall charger (75W) 5 hours
Weight
Car charger (30W) 13 hours
Dimensions
Warranty
Boulder 30 Solar Panel 20-40 hours
Tested and Certified
Nomad 27 Solar Panel 30-60 hours
Operating usage temperature
Inputs Optimal storage temperature
Charge Port 14-29V, up to 10A (120W)
(for solar, wall, or car charging)
Outputs
(2)AC Outlet, 220VAC, 50Hz, pure-sine wave
300W continuous, 600W peak
Internal
12V car port
Battery Type Sealed Lead-acid (AGM)
12V, up to 10A (120W)
Battery Capacity 396Wh (12V, 33Ah)
(2)12V 6mm port
12V, up to 10A (120W)
Life Span Hundreds of cycles
(2)USB port
Fuses none
5V, up to 2.1A (10W)
Inverter 300W pure-sine wave
Q: How do I use my YETI?
Charge every 3 Months
A: The output ports must be turned on
Yes
before you can recharge gear from
29 lbs (13.2 kg)
your YETI. Push the power button
10.25 x 8 x 8 in (26 x 20.3 x 20.3cm)
located above each port you will be
6 months
using. You'll know the port is turned on
CE, FCC, RoHS when the green LED light on the button
is turned on.
32-104F (0-40 C)
77F (25C)
Q: How do I know if my YETI is charged?
A: To check the charge level of your YETI,
refer to the LCD Battery Display. When
lit up, you'll see a battery outline with 5
segments, indicating the current
charge level. You can turn on the
display by pushing one of the power
buttons. If at any time you hear your
YETI beeping, the battery is low - plug
it into a power source immediately.
Q: How do I charge my YETI?
A: You can easily charge your YETI with a
wall plug, solar panel, or from a car. Once
you have decided on a source, plug the
appropriate cables into the INPUT Port on
the front of your YETI. You will know the
Yeti is charging when the green LED light
next to the INPUT port lights up, and the
battery segments in the LCD BATTERY
DISPLAY are blinking. The YETI is fully
charged when all battery segments stop
blinking and remain solid.
Q: How should I store my YETI?
A: Having your YETI connected to a
power source at all times, like a solar
panel or a wall plug, keeps its battery
healthy and topped off. This prolongs
battery life and will ensure your YETI
is ready to recharge your gear at all times.