MasterTemp
BYPASS ACCESS PLUG KIT (472648Z) INSTRUCTIONS
This product must be installed and serviced by a professional service technician qualified in pool/spa heater installation
and maintenance. Some jurisdictions require that installers be licensed. Check with your local building authority about
contractor licensing requirements. Improper installation and/or operation could create carbon monoxide gas and flue
gases which could cause serious injury or death. If you do not follow these instructions exactly, a fire or explosion may
result, causing property damage, personal injury or loss of life. Improper installation and/or operation will void the
warranty. For additional free copies of these instructions; call (800) 831-7133.
Pentair Water Pool and Spa, Inc.
1620 Hawkins Ave., Sanford, NC 27330
10951 W. Los Angeles Ave., Moorpark, CA 93021
Visit us on the Internet @ www.pentairpool.com or www.staritepool.com
© 2008 Pentair Water Pool and Spa, Inc. All rights reserved.
This document is subject to change without notice.
Rev. A 1-21-08
POOL HEATERS
[ASME MODELS - ONLY]
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
FOR YOUR SAFETY - READ BEFORE OPERATING
120/240 VAC NATURAL GAS/LP GAS
ASME MODELS
400K BTU/HR (MasterTemp)
400K BTU/HR (Max-E-Therm)
(800) 831-7133
•
(800) 831-7133
•
Max-E-Therm
®
and
WARNING
Natural Propane
460775
460763
(919) 566-8000
•
(805) 553-5000
•
460776
460764
®
P/N 473756
Need help?
Do you have a question about the MasterTemp and is the answer not in the manual?
Questions and answers