Table of Contents
Advertisement
Section 16: Changing Your Sound Settings
This section shows you how to customize your phone's audio
properties, such as ringers, keypad tones, alerts, shut down
sounds, and more.
Accessing the Sounds Menu
To access the Sounds menu, do the following:
In standby mode, press Menu (
1.
The Sounds menu appears in the display.
Tip: To launch the Sounds menu using a voice command — In standby
mode, press and hold
command." Say "Go to Sounds" into the microphone.
Select the desired sub-menu. The following sections
2.
describe the Sounds sub-menus in greater detail.
Volume
Use the Volume sub-menu to set the default volume for incoming
calls and alarms.
From the Sounds menu, select Volume. The following
1.
options appear in the display:
• Voice Calls — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming calls.
), then select Sounds.
until the phone prompts, "Say a
• Messages — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming messages.
• Alarms — Lets you set your phone to be silent, play a sound, and/
or vibrate in response to a preset alarm time being reached.
Select the desired option.
2.
Use the Navigation key or the Volume key (on the left side
3.
of your phone) to change the volume level (Ringer Off,
Low, Low/Medium, Medium, Medium/High, High) or
vibrate mode (Vibrate, Vibrate/High) for the selected
option.
Tip: To preview the selected ringtone or alert tone while adjusting the volume
setting, press the Play soft key.
Press
to save the volume level/vibrate mode.
4.
Ringer Type
You can assign ring tones for calls, alarms, and other alerts in the
Ringer Type sub menu.
1.
From the Sounds menu, select Ringer Type. The following
Ringer Types appear in the display:
• Voice Calls
Changing Your Sound Settings
114
Advertisement
Table of Contents
