Storing Food In The Appliance; Temperature Indicator - Bosch KSL Series Operating Instructions Manual

en
Storing food
in the appliance
Note the refrigeration
zones in the refrigerator
compartment!
The air circulation in the refrigerator
compartment produce different refrigerant
zones:
• Coldest zone
is between the arrow stamped on the side
and the glass shelf situated below, Fig. 5.
Note: Store perishable food (e.g. fish,
sausage, meat) in the coldest zone.
• Warmest zone
is at the very top of the door.
Note: Store e. g. cheese and butter in the
warmest zone.
When served, the cheese will not have
lost its flavour and the butter will be easy
to spread.
Please note
Wrap or cover food before placing in
the appliance. This will retain the aroma,
colour and freshness of the food.
In addition, flavours will not be transferred
between foods and the plastic parts will
not become discoloured.
We recommend arranging the food
as follows:
S In the freezer compartment* :
Frozen food, ice cubes, ice cream
S On the shelves in the refrigerator
compartment (from top to bottom):
cakes and pastries, ready meals,
dairy products, meat and sausage
24
*only for appliances with a freezer compartment
S In the vegetable container:
vegetables, salad, fruit
S In the door (from top to bottom):
butter, cheese, eggs, tubes, small
bottles, large bottles, milk, juice cartons
Usable capacity
Information on the usable capacity can be
found inside your appliance on the rating
plate.

Temperature indicator

(Not all models)
Do not expose the temperature indicator
to direct sunlight and do not place in your
mouth.
The temperature indicator indicates
temperatures below +4 °C and is used
to determine the required setting of the
temperature controller. Set the
temperature controller between 2 and 3
depending on the ambient temperature.
Select +4 °C or colder for a
degree precision setting.
After approx. 12 hours, when the
temperature has dropped below +4 °C,
the colour of the temperature indicator
changes from black to green and "O.K."
is also indicated (if this does not occur,
gradually set the temperature selector
colder).
Correct setting Temperature too
high, set
temperature
controller colder