Page 2
The CPH-10 Sub features a single high-quality 10” bass unit, fitted within a specially tuned, elegant and contemporary cabinet, offering vertical and horizontal floor placement and as well an aesthetic pleasing on wall solution for installs where floor space is premium.
Page 3
- Crossover, low-pass, full range, 100 Hz. and 400 Hz. 24 dB. per octave - Crossover, hi-pass, full range,100 Hz. and 400 Hz. 24 dB. per octave - ASOF (Artcoustic Subwoofer Continued Filter) Slam, depth 1 and depth 2 - High current bi-polar technology...
Employing one 10” woofer, capable of reproducing low frequency signals accurately and effortlessly right down to 30Hz. The CPH-10 subwoofer is ideal for use in high-end installations where sound quality is paramount, for larger rooms, or where a higher SPL is required, use multiple units.
Page 6
Depth 1 EQ slope optimized for smaller Artcoustic subwoofer models, such as IWS-10 CPH-10 and Impact 1. The Depth 1 setting, mainly enhances the very deep frequencies, below 35 Hz. This setting is good for installations with main focus on 2-channel music reproduction.
Page 7
SPECIFICATIONS PDA1000 Technical Specification Stereo 2 x 450 watt 8 ohm Bridged 1 x 1000 watt 8 ohm Max Power Consumption: 1300 watt / 3400 BTU/H - Full range: 20 Hz-20 KHz ± 0.5 dB - Low-pass: 20 Hz-100 Hz 24 dB/oct 20 Hz-400 Hz 24 dB/oct - Hi pass: 100 Hz-20 KHz 24 dB/oct 400 Hz-20 kHz 24 dB/oct - S/N Ratio: >103 dB - THD (at 1 watt into 8 ohms 1KHz): <0.05%...
For damages caused by any use other than correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Artcoustic UK Ltd. For damages caused by faulty or unsuitable ancillary equipment For damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of Artcoustic UK Ltd.
Need help?
Do you have a question about the CPH-10 and is the answer not in the manual?
Questions and answers