CB2 Sandbar Assembly Instructions

sandbar
Thank you for purchasing the Sandbar Coffee
Table/Bench. This page lists all the contents included in
the box. Please take the time to identify the hardware as
well as the individual components to this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
components
Made in Vietnam - r01
COFFEE TABLE/BENCH
2 – side
panels
1 - crossbar
1 – top
panel
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
hardware
4 – long
bolts
10 – wood
dowels
Missing hardware?
Please call 800.606.6387
2 - small
for replacements.
washers

tools required

allen wrench (included)
rubber mallet
Carefully place top panel upside down on a
protected surface so that the screw holes are
facing upward. Insert and slightly tap 6 wood
1
dowels in the pre-drilled holes as illustrated.
4 - large
2 – short
washers
bolts
4 - pads
6 - spring
washers
Page 1 of 2