CB2 Smart Assembly Instructions

smart
MARBLE CONSOLE TABLE
Thank you for purchasing the Smart Marble Console
Table. This page lists all the contents included in the
box. Please take the time to identify the hardware as
well as the individual components to this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
components
2 - frames
(1 front, 1 back)
1 - marble panel
4 - crossbars
Made in Taiwan - r01
Customer Service 800.606.6252 | www.cb2.com
hardware
16 - bolts 8 - spring
washers
8 - connecting
brackets
Missing hardware?
Please call 800.606.6387 for replacements.

tools required

allen wrench (included)
A
Make sure holes on each
connecting bracket are facing
downwards when assembling
A. With the assistance of another adult, carefully
place 2 frames with the holes facing upwards
onto a clean, padded surface. Attach 1
connecting bracket with 1 bolt and 1 spring
washer per corner as shown. Secure bolts with
an allen wrench. Make sure holes on each
connecting bracket are facing downwards.
B. Insert 2 feet into each frame as shown. Press
1
feet firmly to secure.
6 - rubber
bumpers
4 - feet
B
Page 1 of 2