Change Password; Sim Lock; Fdn Mode - Samsung SGH-x507 Series User Manual

• Disable : you are not asked to enter the phone password when you switch on the
phone.
• Enable : you are required to enter the phone password when you switch on the
phone.

Change Password

The Change Password feature allows you to change your current phone password to
a new one. You must enter the current password before you can specify a new one.
The password is preset to "00000000" at the factory. Once you have entered a new
password, you are asked to confirm it by entering it again.
Privacy
Using this menu, you can lock your phone and its' contents. Once you have locked
the contents, you must enter the phone's password to access the associated menus.
The password is preset to "00000000" at the factory.

SIM Lock

When the SIM Lock feature is enabled, your phone only works with the current SIM.
You must enter the SIM lock code to unlock the SIM so you can use a different SIM
card.
Once you have entered the lock code, you are asked to confirm your password.
Reenter your password and press the OK soft key.

FDN Mode

FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The following options are available:
• Disable : you can call any number.
• Enable : you can only call phone numbers stored in Phone book. You must enter your
PIN2. The following options are available:
• Full length entries or wild cards can be entered in to the FDN list.
• A full length number with a specific contact name can be entered into the FDN list.
• Wildcard entries allow a range of numbers to be dialed with a single entry: ex. 555
– All dialed numbers that begin with 555 will be allowed. Numbers that do not
match the conditions in the FDN list will be restricted. Note: Entering an asterisk (*)
is not required for wild card entries.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Section 8: Changing Your Settings 71