ETEKCITY EAM DT1 User Manual page 7

Deflate/Storage
1. Plug in the power cord and turn the control dial
counterclockwise to "Deflate" the air mattress.
2. Allow the air mattress to completely deflate.
Unplug the power cord and place it back into the
storage compartment.
3. Make sure the mattress is clean and dry.
4. Lay mattress felt-side up and fold the mattress
into thirds, then roll up the mattress to release
any remaining air.
5. Store the mattress in a cool, dry place.
Manual Inflation/Deflation
Open the first part of the manual inflation/
deflation valve and connect an air pump or hose
to the mattress. Inflate to the desired firmness and
disconnect the air pump.
To deflate the mattress, fully open the manual
inflation/deflation valve to release all of the air from
the mattress.
7