Lorex LWB4800 Quick Reference Manual

HD Wire-Free Security System
GUIDE
1 / 2
English Version 2.0
Package Contents
HD Recorder Rechargeable
(Model Number: LHWF1000 Series)
Power Pack*
Recorder Power
Adapter
Camera Mounting Kit*
Dimensions
2.4"
60mm
LWB4800 Series
5.3"
130mm
2.9" 5.0"
73mm 126mm

Need Help?

Visit us online for up-to-date software and complete instruction manuals.
1
Search for the model number
2
Click on your product in the
3
4
Click on the Downloads tab
Copyright © 2018 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
Quick Connection Guide
www.lorex.com
* Per camera in multi-camera packs
OR
HD Wire-Free Security Cameras
(Model Number: LWB4800 / LWB4900 / LWB5800 / LWB6800 Series)
Camera Antenna* USB Mouse
Power Pack
Ethernet Cable
Adapter
7.4"
187mm
7.1"
180mm
LWB5800 / LWB6800 Series
5.5"
134mm
2.9" 6.6"
73mm 168mm
Visit lorex.com
of your product
search results
STEP 1: Initial Setup
Before you begin, you will need to prepare the wire-free cameras and
Power Packs.
NOTE: Power Packs come fully charged with no need for initial charging.
To prepare the cameras:
1. Attach an antenna to each
camera. For LWB4800 /
LWB4900 Series cameras,
twist the adjustment ring
counterclockwise to reposition
each camera as shown to the
right. Twist clockwise to tighten
when finished.
2. Peel off the PLEASE REMOVE
label covering the contacts on
each Power Pack. Insert the
charged Power Packs into each
camera base. Push up until the
Power Pack 'clicks' into place.
STEP 2: Setting Up the Recorder
Next, you must set up the recorder and connect it to your network.
To set up the recorder:
1. Connect the recorder to your router
using the included Ethernet cable.
DEVICE ID: xxxxxxxxxxxxx
Toolkit
HDMI Cable
• This guide describes basic setup of the recorder only. This
installation is intended for users who wish to monitor their
system using the free Lorex Cirrus app on their smartphone
or tablet.
• You may choose to use the recorder interface to control
your wire-free security system. Connect the included USB
mouse to one of the USB ports labelled Mouse / Backup, and
connect a monitor using the included HDMI cable. See the
included Quick Reference Guide for details.
STEP 3: Connecting with Lorex Cirrus
Connect to your system using the free Lorex Cirrus app for smartphones and
tablets (iOS and Android).
To connect with Lorex Cirrus:
1. Download and install the free Lorex Cirrus app from the
App Store or Google Play Store.
2. Tap the Lorex Cirrus icon to launch the app.
3. Tap to open the menu. Tap Devices, then tap Add.
4. Enter the following:
A
B
C
D
E
5. Enter a new, secure 8-15 character password. This password will be used
to connect to your system from now on.
Record your password below and store in a secure place:
6. Your cameras will appear on the Live screen of the app.
Tap the play button (
that are in sleep mode.
NOTE: If you do not see video from a particular
camera, remove the Power Pack by pushing on the
release tabs* then re-insert. You should see video from
the camera on the Lorex Cirrus app or monitor within
10 seconds of re-inserting the Power Pack.
Initial setup is now complete! Turn the guide over for
instructions on positioning and mounting the cameras.
LWB4800 / LWB4900 Series
Adjustment
ring
2. Connect the included power adapter
to the recorder.
DEVICE ID: xxxxxxxxxxxxx
OPTIONAL: Full Recorder Setup
A Ensure Device ID is selected.
Tap to scan the QR code on the back
B
F
of your recorder using the camera on
your mobile device.
C Ensure the Client Port reads 35000.
Enter the username (default: admin).
D
Enter the password (default:
E
00000000).
F Tap Save.
) to stream live video on channels
LWB5800 / LWB6800 Series
DEVICE ID: xxxxxxxxxxxxx
* *
LHWF1000_QCG_EN_R2