Advertisement
4. With the cover removed, lift the battery from its position.
5. Unplug the battery and replace with a battery pack from TDK Life on Record. A
screwdriver can be used to carefully press the connector of the new battery into
the socket.
6. Slightly twist the wires as the battery is lowered into place.
7. Reassemble the base plate by inserting into the retaining slots on both sides of
the body, in the leftmost position. Then use a flat bladed screwdriver to move
the plate to the right, aligning with the screw holes at the right end.
8. Replace the two screws and the two rubber pads.
Advertisement
