Switching Acknowledgment; Status Led, Gps Led - DANHAG APP-control Operating Manual

APP-control E-BUS v10.x

Switching acknowledgment

8.3
8.3.1
Switching by call
When switching the APP-control by call, you will hear a dial tone. During this
time the caller's ID will be analyzed. In case of a valid phone number th
switching operation will be released and you will hear a busy tone.
8.3.2
Switching by APP or SMS
You can query the current switching state of the APP-control by sending a SMS
with the text "INFO" to the APP-control.

Status LED, GPS LED

8.4
Die LEDs zeigen den aktuellen Zustand des Gerätes und des GPS-Empfängers an.
Status LED
flashing green (every 3s)
lighting green
flashing red
lighting red
GPS LED
off
flashing red (every 1s)
flashing green (every 1s)
Standby (logged in)
Heater is switched on
Network search (not logged in)
fault
GPS-receiver off
no GPS-reception
GPS-reception OK
12 - 32