Adcon A753 User Manual page 25

4. Click the
dialog (Figure 11 shows a COM1 com port).
Figure 11. Hyperterminal and com port properties dialogs
5. In the
6. Select
7. Select
8. Back in the hyperterminal window, press Enter to continue the
upgrade.
WARNING When you continue with the upgrade process, any existing firmware
image in the A753's flash memory will be erased! You must supply a
valid image for upload or the A753 will have only bootloader
capabilities (that is, it will have no radio capabilities).
9. Enter Y to continue the upgrade.
The bootloader starts sending the letter C (for connect)
button to display the com port's Properties
Configure
field, select
Bits per second
in the com port's Properties dialog to close it.
OK
in the hyperterminal's Properties dialog to close it.
OK
---------------------------------------------------
The current firmware image must be erased for the
upload.
If you continue now, you *MUST* upload a valid
firmware image for an A753!
Continue? [y/n]:
CHAPTER 3
Upgrading the Firmware
.
115200
25