Netafim Radionet Installation Manual page 3

RadioNet
33
Connection - Host Unit to Control RS485
Communication to the GaliNet (Galileo) Controller and the Host is by a proprietary RS485 serial format.

The RJ11 communication cable is connected between the GaliNet and the Host.

The Jumpers LK2 and LK1 must in the UP position linking the center and top pins.

The GaliNet controller needs to have the same input/output cards types that will be defined on
the Host

Connection of wires:
Plug RS485
A and B
Jumpers LK1 and
LK2
Doc. Name: RadioNet - User Manual
Crop Management Technologies
INSTALLATION MANUAL
RJ 11 Plug to be plugged
on GaliNet CPU Comm
Port RS 485
Revision: 01 Page: 3 of 7 pages