Page 1
Settings for GaliNet - Galileo Controller with RadioNet Host Page | 1...
Page 2
RadioNet Host. This is a supplement to the RadioNet Installation Manual. NOTE: For complete information on the RadioNet system, overview, safety, installation and settings, we recommend reviewing the RadioNet Installation Manual prior to using this supplemental manual. For additional information, please contact a Netafim USA Certified Dealer.
Page 3
Connection of wires: Plug RS485 A and B Jumpers LK1 and RJ 11 Plug to be plugged on GaliNet CPU Comm Port RS 485 Doc. Name: RadioNet - User Manual Revision: 01 Page: 3 of 7 pages Crop Management Technologies...
Page 4
INSTALLATION MANUAL RadioNet Specifications for RS485 Communication Cable between the RadioNet Host and GaliNet Controller (Galileo) Host RS 485 RJ11 Plug Pin #3 Pin #4 Connection to GaliNet W Controller GaliNet – Galileo RS485 port. Communication cable between the Host and the GaliNet –...
Page 5
Settings for the Input and Output cards on the GaliNet Controller (Galileo) The host will function with the GaliNet - Galileo controller like a virtual expansion box. The Virtual expansion box will have the input and outputs card that will be used to control the RadioNet RTU outputs or/and inputs.
Page 6
When the cards are defined, the “Mapping” box need to be selected. This screen has the link for assigning the Controller outputs and the RadioNet RTU outputs. Choose the output or Input number from the virtual card that was already defined. Choose the RadioNet unit with the output number and move it to the right box.