Whittier Wood Shaker Table Assembly Instructions

Thank you for purchasing this quality product.
Be sure to check all packing material carefully for
small parts which may have come loose inside
the carton during shipment.
Count all parts and hardware, compare with the parts
list below to be sure all parts are present.

PARTS

ITEM DESCRIPTION
1 Table Top with Apron
2 Table Leg

HARDWARE

ITEM DESCRIPTION
A Wrench
5/16"x2½"
B Hex Bolt
C 5/16" Flat Washer
D Spring Washer
1. Lay the table face down on a, clean, soft, flat surface and use caution during
assembly to prevent scratching the table top.
2. Place a leg in corner of table and insert two bolts with washers through the holes
in corner block of apron frame into the leg and tighten with wrench. Repeat for
the other legs.
Whittier Wood Products customer service directly by calling
QTY
1
4
QTY
1
8
8
8
ASSEMBLY INSTRUCTIONS
693W1 Shaker Table
For information or replacement parts, please contact
toll free at 800-653-3336
or writing to P.O. Box 2827 • Eugene, Oregon - USA 97402
We will replace any parts which are defective, missing,
or damaged during assembly.
Business hours: Mon.-Fri. 7:00 to 5:00 Pacific time.
A message can be left 24 hours, 7 days a week.
(30x48)
Rev. 2/05