Table of Contents
Advertisement
Refer to the following table:
Category
Key
Strokes in each category
Entering strokes and characters in
Stroke modes
1. Press the keys that correspond to a
character's component strokes. Press keys
in the order that you would write the
strokes, using one press per stroke.
Example: To enter
and then [3] to enter
If you are uncertain of the stroke order,
press [6] in place of each questionable
stroke. Continue entering strokes until the
character displays or until you finish the
character.
2. Press [Up] or [Down] to scroll through the
choices.
3. To select a character and add it to your
message, press the corresponding key, [7]
to [ ] .
Other Stroke mode operations
•
Press [ ] to insert a space.
•
Press [Left] or [Right] to move the cursor.
•
Press [C] to clear letters one by one. Press
and hold [C] to clear the entire display.
, press [5] to enter
.
23
Advertisement
Table of Contents
