Advertisement
WIPER MOTOR | W25
Installation Instructions
Before installation please read these instructions.
■ 2 Speed, self-parking
■ Heavy Duty motor, 25Nm
■ Wipershaft in stainless steel
■ Various sweep angle: 45 - 110°
■ Dynamic park circiut
■ Internal thermoswitch
■ Insulated ground
■ EMC protected
■ Powers up to 750mm/750mm - Arm/blade combinations
www.rocaindustry.com
Advertisement
Table of Contents
Related Manuals for Roca W25
Summary of Contents for Roca W25
-
Page 1: Installation Instructions
WIPER MOTOR | W25 Installation Instructions Before installation please read these instructions. ■ 2 Speed, self-parking ■ Heavy Duty motor, 25Nm ■ Wipershaft in stainless steel ■ Various sweep angle: 45 - 110° ■ Dynamic park circiut ■ Internal thermoswitch ■... - Page 2 Instructions - Adjusting the sweep angle and parking position 1. Nut 3. Slider 2. Bracket Left park pos Changing the parking position. (Must be done before installation) Before the parking position is changed, the wiper motor should be in parked position (Default is set to left). Keep battery main switch turned off during any operation inside of the wiper motor.
- Page 3 Motor unit (Red) F (Green) S Alt. 1 (3 pos.switch) Roca switch 2 speed / Parking Actuator 466026 18,9 Alt. 2 (Roca switch) Switch 17,6 5,16 14,2 466221 / 12V 466222 / 24V Fuse 12,4 1,11 Cut cables, see picture Alt.
- Page 4 Variations: Limited warranty Max length: Voltage input: 12 V 24 V - Roca warrants the wiper motors to be free 531015 531016 from defective material and workmanship 531025 531026 for a period of 3 years from the date of...
Need help?
Do you have a question about the W25 and is the answer not in the manual?
Questions and answers