Page 2
First Sight FIFISH P3 is capable of diving to 100 meters (330 feet) depth, both functional in fresh and sea water. There are 3 powerful thrusters (2 horizontal, 1 vertical), which allow P3 moving in 6 directions: forward, backward, left , right , up and down.
Operating FIFISH P3 1. Install the FIFISH APP Option 1. Scan the QR code down below with your smart devices for the FIFISH APP installation. Option 2 Search the “ FIFISH” on App Store GooglePlay Android Option 3 Go to our website for download...
3.Charging The drone’s tether socket All 5 LEDs indicators is on Power adaptor the drone can be used for either data means the drone is fully transferring or charging charged Power adaptor (RC) Plug in (RC) The Power ON/OFF shows white light is constantly on means the RC is fully charged 4.Getting Ready...
Page 7
1.The 3 button (in the center) will flash one by another and rotate in clock-wise, which means the RC’s is ready to be connected. Adjust the width for Press the button your smart devices on the back of the bracket Plug in the tether 4.2.Turn ON the drone Take off the protective cap...
Page 8
4.3.Connect with the FIFISH APP Connect your smart device to the remote controller’s ( RC’s) Wi- Fi. DEVICE MEDIA DEVICE MEDIA Settings Fifish P3 Wi-Fi Fifish P3 Wi-Fi FIFISH RC_XXX CONNECT GO DIVE Network: FIFISH RC_XXX Open the FIFISH APP , Press the “GO DIVE”...
Page 9
6.Copy Video and Pictures We provide introduction for exporting the original 4K high definition video and pictures from the drone. The detailed introduction can be find on our website. www.qysea.com/support /manual/ Attention: ! Navigation knowledge is very important for you, P3 and environmental safety!
Page 10
Maintenance Guide 1.Soaking and rinsing the drone with fresh water, keep it air dry and avoid direct sunlight. Make sure the tether plug is clean and dry, screw on the protective cap. 2.Check the propellers after every dive ( make sure there are NOT any entanglement, such as, seaweed) .