Important!: Please note that the hearing aid category specified for this
product represents compatibility only when the phone is in the
slide open configuration, which has maximum antenna
efficiency. When the option is enabled and the slide is open
during a call, the t-coil will adjust the audio for use with t-coil
hearing aids (see "FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices" on page 154.).
Calls
This menu allows you to change the actions taken by the phone
when dialing and receiving calls.
When the Idle screen displays, press the Menu soft key and
➔
select Settings
Calls. The following options are available.
Use the Down Navigation key to scroll to and set options:
General
This allows you to configure some common high level
parameters used by the phone for most types of calls.
Show My Number
•
: allows you to select how your ID is handled when an
outgoing call is initiated. Use the
your selection. Press the Select soft key or the
selection. Options include:
Set By Network : you are identified to the other party using the default
–
network information.
Show Number : your phone number and name are sent to the other
–
party.
Up
Down
or
Navigation key to highlight
key to make your
Hide Number : your identifying information is hidden from the other
–
party.
Call Answer
•
: allows you to select how your phone answers incoming calls.
Up
Down
Use the
or
Navigation key to highlight your selection. Press the
Options
Select
soft key, then the
Options include:
–
Send Key : allows you to answer an incoming call by pressing either
the Accept soft key or the
– Open Slide: allows you to answer an incoming call by opening the
slide.
Any Key : allows you to answer an incoming call by pressing any key
–
on your phone.
: allows you to create a text message to be sent when you
• Auto Reply
miss an incoming call.
Call Status Tones
•
: allows you to activate an alert tone for one of three
available status categories. Use the
highlight your selection. Press the
Save
the
soft key to save your new selection. Options include:
Call Connect Tone : allows you to activate an alert tone when the a
–
connection has been made.
Minute Minder : allows you to activate an alert tone which sounds
–
every minute the call is active.
Call End Tone : allows you to activate an alert tone when the line is
–
disconnected.
soft key to save your new selection.
key.
Up
Down
or
Navigation key to
key to make your selection. Press
Changing Your Settings
84