Samsung SGH-A777 Series User Manual page 93

Configuring your Phone's Network Profiles
When the Idle screen displays, press the Menu soft key,
1.
then select Settings
Highlight one of these options:
2.
• MEdia Net
• AT&T MMS
• AT&T IMS
Note: The MEdia Net WAP is pre-configured and cannot be altered on this
screen. The AT&T MMS connection option can be edited, renamed, or
deleted on this screen. Your phone is set up by default for connecting
to the network. If you change the settings without first checking with
your service provider, the web browser, MMS, and e-mail features may
not work properly.
To create a new connection, press the Options soft key,
3.
then select New.
- or -
To edit the existing AT&T MMS, highlight this entry, press
the Options soft key, then select Edit.
Select the parameter you want to edit:
4.
• Set Name: enter a profile name.
• Access Name: edit the access point name.
89
➔ ➔
Connectivity Network Profiles.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
• Protocol: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
• Home URL: enter the URL address of the page to be used as your
homepage.
• Proxy address: MEdia Net set as the proxy server address and
port.
• Linger Time (Sec.): set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in that
time.
• Advanced Settings: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic
Class.
– Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.
– Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
– Traffic Class: select the traffic class.