FDS -TP User Manual

FDS-TP Thermal Printer
The FDS-TP printer is the cost effective solution for printing all timing data.
The FDS-TP Printer is the ideal option for timekeeping, designed specifically to meet demanding
environments and to be the perfect companion to the FDS Timing TBox.
With printing speeds of up to 90mm/sec. it exceeds many requirements during a timing session.
The High-Performance Li-Ion battery allows non-stop printing for up to 2 days.
Its micro size and light weight (134 g) makes it easy to store and transport.
Notice:
For protection during shipping an insulating tape protects the Li-ion Battery.
1.
Prior to first use and charge please remove the insulating tape.
2.
To power on the printer: press the ON power button for 3 seconds.
3.
The correct paper loading method is mentioned later in the manual.
4.
With a fully charged battery the autonomy is approximately 120 units of Thermal Paper
5.
(58x30mm). Standby time is 2-3 days.
Rechargeable batteries contain harmful metals, so should never be thrown away with daily
6.
rubbish, they should be returned to manufacturer for disposal or recycled elsewhere.
Features:
•
Very economical priced
•
Thermal paper - 58mm wide
•
High speed printing
•
Li-Ion battery
•
Stand-by and auto wake-up up to preserve the battery
•
Small and lightweight, reliable and easy to integrate
•
User's manual
September 2017 - Version EN 1.1
www.fdstiming.com
User manual
–
Small and reliable