Table of Contents
Advertisement
Product description
Designated use
The CART is to be used on hard level surfaces.
To move the stacker between buildings, warehouses etc
The gradient of the slope must not be more than 5%
Make sure load is not loose or unstable.
Do not pick up loads on tips or forks or edge of platform.
Do not overload.
The road surfacing must be solid and have a good grip.
Travel routes must offer sufficient load-bearing capacity for the loaded CART.
The CART is not suitable for continuous use in cool-houses!
Ambient conditions
Temperature
From
To
Degree of humidity
Permitted
floor
incline
Loaded
Unloaded ¹
OPERATION
Visually inspect E-CART for damaged and worn parts, before
Electric Cart is taken into operation. Authorized person should
read and understand all instructions
Caution!
Pedestrian controlled industrial trucks may only be operated by persons who
have been satisfactorily instructed in operating the truck and have proved their
ability to operate the truck to the responsible representative of the operating
company.
The first driving attempts should take place on level and spacious surfaces.
Recommendation:
The operator who is to maneuver the CART should be allowed to practice, when
unloaded, until they can safely operate these functions.
E-CART (ELECTRIC CART)
14
113
≤70
Max. 0.5
Max. 2.0
9
°F
°F
%
%
%
Advertisement
Table of Contents
