Armitage Shanks SANDRINGHAM 21 Installation Instructions

Armitage Shanks SANDRINGHAM 21 Installation Instructions

Self closing basin pillar taps

Advertisement

Quick Links

SANDRINGHAM 21 self closing
basin pillar taps
Commercial Self closing ½" chrome plated basin pillar taps
Supplied in pairs – S 0672 AA
Single

Introduction

These self closing taps are designed for water economy.
The taps are operated by simply pressing down on the handles.
Once actuated the taps will run for approximately 12 to 16 seconds &
then automatically shut off.
The taps are designed to be supplied with pre-mixed or cold water.
BEFORE CONNECTION, FLUSH WATER THROUGH PIPEWORK TO REMOVE
ALL DEBRIS ETC. WHICH COULD DAMAGE THE VALVE MECHANISM
INSTALLER: After installation please pass this instruction leaflet to user
– S 0673 AA
IMPORTANT
- 1 -
INSTALLATION
INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SANDRINGHAM 21 and is the answer not in the manual?

Questions and answers

Summary of Contents for Armitage Shanks SANDRINGHAM 21

  • Page 1 INSTALLATION INSTRUCTIONS SANDRINGHAM 21 self closing basin pillar taps Commercial Self closing ½” chrome plated basin pillar taps Supplied in pairs – S 0672 AA – S 0673 AA Single Introduction These self closing taps are designed for water economy.
  • Page 2 Water regulations - 1 - Product dimensions Product box contents: S 0672 AA 2 x Taps (with 1x red & 1x blue index buttons) 2 x Brass back-nuts. 2 x Base washers 2 x 4L/m Flow regulator S 0673 AA 1 x Tap 2 x Index buttons (Red &...
  • Page 3 1. Before connection, flush water through pipe- work to remove all debris etc. to prevent damage to the valve mechanism. THEN ENSURE WATER SUPPLIES HAVE BEEN ISOLATED. 2. Offer tap tails into basin holes, ensuring seals are in place. HOT tap should be fitted on left hand side of the basin (viewed from front).
  • Page 4 Cleaning chrome surfaces When cleaning chromed products use only a mild detergent, rinse & wipe dry with a soft cloth. Ideally clean after each use to maintain appearance. Never use abrasive, scouring powders or scrapers. Never use cleaning agents containing ammonia, hydrochloric acid, sulphuric acid, nitric acid, phosphoric acid or organic solvents.

Table of Contents