Brother GT-3 Series Reference Manual page 2

ENVIRONMENTAL CONDITIONS
> Mandatory Temperature & Humidity Requirements:
FIRST BASIC STEPS
FIRST BASIC STEPS
> HOW TO DO A NOZZLE TEST ?
Always place the Platen at level A
NZC
Menu > Test Print
Menu > Test Print
If not all the nozzles are firing, start a Head Cleaning
> HOW TO DO A PRINT HEAD CLEANING ?
Only a few nozzles missing, then
PHC
If more then 10 nozzles, perform
Perform a new Nozzle Test to check the result and redo if not all nozzles are firing
BEST PRACTICE FOR PRINTING
3 mm
>
ALWAYS KEEP THE
1
TEMPERATURE
MIN
18
MAX
30
C
> Nozzle Check CMYK > OK
> >
Nozzle Check White OK
PH
A
CLOSEST DISTANCE
BETWEEN THE PRINTHEADS AND THE SURFACE OF THE GARMENT !
HUMIDITY
%
°
°
!
to check colors on white paper sheet
to check whites on transparent or black sheet
Head Cleaning > Normal Cleaning
Head Cleaning > Powerful Cleaning
Ink Mist
MIN
45
MAX
85
TO BE DONE EVERY WORKING DAY
... and select PH + OK
... and select PH + OK
PH
Ink Mist
10 mm
F