Ambient Temperature; Tire Inflation Pressures - BMW F 800 R 2010 Rider's Manual

Table of Contents

Advertisement

Ambient temperature

3
with onboard computer
26
When the motorcycle is
stopped, the engine heat
can falsify the measurement
of the ambient temperature. If
the influence of the engine heat
becomes too great,
porarily shown in the display.
If the ambient temperature drops
below 37 °F (3 °C), the tempera-
ture display flashes as a warning
of possible icing-up. The display
automatically switches from any
other mode to the temperature
z
reading when the temperature
drops below this threshold for
the first time.

Tire inflation pressures

with Tire Pressure Control
(TPC/RDC)
OE
OE
--
is tem-
The displayed tire inflation pres-
sures refer to a tire temperature
of 68 °F (20 °C) . The left-hand
value 1 indicates the air pres-
sure of the front wheel, and the
right-hand value 2 the inflation
pressure of the rear wheel. Im-
mediately after switching on the
ignition, "
the transfer of the inflation pres-
sure values does not begin until
a speed of 19 mph (30 km/h) is
exceeded for the first time.
If the warning triangle 3 is
also shown, a warning dis-
-- --
" is displayed, as
play is concerned. Critical infla-
tion pressure flashes.
If the critical value is at the limit
of the permissible tolerance, the
general warning light also lights
up in yellow. If the determined
tire inflation pressure is outside
the permissible tolerance, the
general warning light flashes in
red.
Additional information on BMW
Motorrad TPC/RDC is provided
from page (
66) .

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents