Page 1
Instruction Sheet P/N 1062384C Prodigyr HDLVr Manual System Installation Instructions WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. E 2006 Nordson Corporation Part 1062384C...
Prodigy HDLV Manual System Installation Instructions Stand Installation NOTE: The stand is optional. Disregard this page if you do not have the optional stand. WARNING: Bolt the stand to the floor before you install the controller mounting arm. The stand will tip over if it is not bolted to the floor.
Prodigy HDLV Manual System Installation Instructions Pump Panel Mounting Options WARNING: Heavy equipment. Get assistance when you lift the pump panel. Wall Mounting Hardware Required Mounting Hole Pattern (Customer Supplied) 469.9 mm (18.5 in.) Use suitable M10 (3/8-in.) mounting hardware.
Prodigy HDLV Manual System Installation Instructions Air Tubing Connections Manual Gun #2 Manual Gun #1 6-mm OD Blue Air Tubing 6-mm OD Blue Air Tubing Pump Panel 6.2-7.6 bar (90-110 psi) Air Supply (12-mm x 1/2-in. NPT fitting is provided.
Prodigy HDLV Manual System Installation Instructions Powder Tubing Connections NOTE: Refer to the Prodigy System Installation Guidelines instruction sheet, part 1069319, for detailed instructions for routing, cutting, and bundling the powder tubing. Manual Gun #2 Manual Gun #1 8-mm OD Clear Powder Tubing...
Page 8
Prodigy HDLV Manual System Installation Instructions Issued 5/06 Original copyright date 2005. Prodigy, HDLV, Nordson, and the Nordson logo are registered trademarks of Nordson Corporation. E 2006 Nordson Corporation Part 1062384C...