Advertisement
3. Flash mode – Pressing this button will cycle between steady
or flashing lights. For multi-color versions, it will cycle from
simultaneous flashing, alternating flashing, single color
flashing back to default.
• Simultaneous flashing – Both laser colors (if applicable)
will flash simultaneously.
• Alternating flashing – Both laser colors will alternately flash
(multi-color only). Press again and it
will default back to simultaneous color
(no flashing).
4. Flash speed – Press this to adjust the flash speed
(slow, medium, fast)
5. Timer presets (2, 4, 6, or 8 hours) – Pressing this will turn
the unit ON and go into standby Mode after # hours.
For example, If you want your Elf Light to display from 6pm to
midnight daily: At desired time, in this case, 6pm, press the
"6h" button. The lights will turn off after 6hrs (midnight) and
will cycle again to turn on at 6pm the next day and so on.
Timer settings will be saved until "timer reset" button is pushed
or if the projector unit is unplugged. A triple-flash indication
from the projector will confirm your timer setting.
6. Timer reset – Press this to reset and turn off the timer.
Note: Using the timer function is recommended
to minimize energy use and maximize product life.
7. LED indicator on remote – This will confirm the remote
battery/buttons are working.
8. Retractable Antenna – Extend for maximum range (Up to 30 ft.
depending on surroundings).
Remote Control Pairing
Your Elf Light remote supports pairings to multiple Elf Lights (maxi-
mum of 4 sets) of the same version (single or multi-color versions)
so you can conveniently control their operation with one remote.
Each Elf Light is paired with its accompanying remote at the factory.
To pair with another Elf Light, simply unplug (if plugged in) and then
plug in the Elf Light. Then quickly press the power button within 5
seconds on the desired remote to be paired. The projector will
"learn" that this will be the remote to pair with. To Unpair, simply
unplug and pair another remote in its place.
PAGE 6
(6)
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
NOTE: This is a standard cautionary statement from the FCC, which is used to
alert the user to troubleshoot in various ways if problems are found.
Read All Instructions
WARNING: When using outdoors, use portable luminaires. Basic safety
precautions should always be followed to reduce the risk of fire, electric shock,
and personal injury, including the following:
a) Use only three-wire outdoor extension cords that have three-prong grounding
plugs and grounding receptacles that accept the appliance's plug.
b) Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the
circuit(s) or outlet(s) to be used for the wet location portable luminaire.
Receptacles are available having built-in GFCI protection and are able to be used
for this measure of safety.
c) Use only with an extension cord for outdoor use, such as an extension cord of
cord type SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW,
SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
THIS PRODUCT HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE
OTHER) AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK.
THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG
DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG.
IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER
USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED.
DO NOT ALTER THE PLUG.
Precautions For Laser Usage
Please check your state and local laws for outdoor laser usage. Although
the Elf Light is generally safe when used responsibly, please exercise the
following precautions:
• Do not aim or shine at people, animals or traffic from land, sea, or air.
• Use with caution within 5 nautical miles of an airport.
• The Elf Light should always be stationary; do not hold in hand when operating.
• Position the Elf Light so that the lights are within the confines of the target object.
• Do not use near infants/cribs and keep away from children.
(3)
Advertisement
