Table of Contents
Advertisement
Changing the WAP Profiles
You can set up 10 server profiles for the WAP browser.
1. In Idle mode, press the Menu (
Menu mode.
2. Select Settings. Highlight Connection Settings and
press the Select soft key or the
3. Select the profile you want.
The following options are available:
•
Profile Name: enter a name that you wish to assign to the
HTTP proxy server.
•
Homepage URL: set the address of your startup homepage.
When the default homepage displays, you can delete it using
the
key and enter your own choice.
•
Bearer: select the bearer to be used for each type of network
address accessed: GPRS or DATA. The remaining options
depend on the Bearer setting.
When the bearer is set to GPRS:
•
Proxy Setting: enter the WAP gateway address required to
connect to the Internet.
•
User Name: enter the User ID required to connect to the
GPRS network.
•
Password: enter the password required to connect to the
GPRS network.
•
APN: enter the access point name used for the address of
the GPRS network gateway.
•
Proxy Status: allows you to activate and deactivate the
proxy status.
When the bearer is set to Data:
188
) soft key to access
key.
Advertisement
Table of Contents
