Use Without An Alarm System - Olympia IC 1280Z Operating Manual

Connecting the Camera

Use Without an Alarm System

Use Without an Alarm System
If you want to use the camera without an alarm system
(Protect Series 6xxx / 9xxx alarm system from Olympia),
you do not need the receiver supplied.
ATTENTION!
Property damage is possible!
The camera could be damaged if you use a wrong
power adapter.
Only use the power adapter supplied.
1. Connect the power cable to the power connection
port (7) and a properly installed power socket.
The LEDs on the network connection port (10) signal
when a connection exists to the network (lights up
orange) and that data is being transmitted (flashes
green).
Camera
16
ATTENTION!
Property damage is possible!
The camera could be damaged if you move the
servomotors by hand or interrupt the movement.
Avoid moving the servomotors by hand or interrupt­
ing the movement of the camera.
2. The servomotors of the camera are controlled automati­
cally. Wait until the process has finished.
Network Cable
G
Router