Installation - Audiolab DQX-7200 User Manual

The lightning symbol within the triangle
symbol is used to prompt the user pay
attention to the risk of electric shock.
Service Information Card
Attach a "maintenance information card" at the
end of this manual, if the unit is fault and send
back to the dealer or service center for repair,
please fill out the form and deliver with the unit.

4. INSTALLATION

Warning: Before you beginning to install
the unit, please make sure to carefully
read and follow the "important safety
instructions" at the beginning of the manual.
Open the packaging and check whether the unit
is damage or not during the transportation. If the
unit is found damaged, please immediately notify
the transportation company. Only you have the
right to ask for the transport damage compensa-
tion. Pleae keep the box well as the damage evi-
dence and provide it for the side delivery check-
ing. Our company will provide you with necessary
assistance.
In aditio, we also recommend you saving all pack-
aging materials for the need of the transportation.
Do not transport the unit without a package to
avoid damaging the unit. To make the unit work
normally, you also need to prepare the following
parts (our company does not provide):
1. Input wiring cable; Output wiring cable;
2. Ethernet cables (individual series need to use
the advanced features);
3. Network router (individual series need to
use advanced features);
4. Rack or unit mounting bracket (provide a
stable table for the unit stacked).
Warning: The third pin (grounding) of
the AC power cord connector which this
unit uses is the necessaty security com-
ponents. Do not use adapters or other methods
to make the ground connection failure.
P. 5
- AUDIOLAB DQX-7200
English version