Maintenance; Disassembly - Bacharach PGM-IR Operation And Maintenance

CO Monitor
2

3 Maintenance

3.1 Disassembly

When servicing the parts inside the CO
Items Required:
Medium Phillips head screwdriver

Procedure:
1. Unplug battery pack from monitor.
2. Remove the monitor from the soft carrying case.Remove a total of 10 screws from the locations shown in
the illustrations below.
3. Carefully separate the metal chassis.
Remove
Screws (3)
Front
Remove
Screws (3)
Rear
Instruction 3015-9000 Rev 2
monitor, disassemble the monitor's metal chassis as follows:
2
Remove Screws (2)
Parts and Service
Right Side
21