Specifications - Bacharach PGM-IR Operation And Maintenance

Introduction

1.10 Specifications

Specification
Gas Detected
Measuring Range
Warm-Up Time
Detector Type
Display Resolution
Accuracy
Response Time
System Noise
Operating Temperature
Ambient Humidity
Altitude Limit
Power
Power Consumption
Front panel
Audible Alarm
Dimensions (D x L x W)
Weight
Warranty
4
CO (R744)
2
20 to 100,000ppm (10% vol.)
5 minutes (300 seconds)
Infrared, Non-Dispersive
1 ppm
±1 ppm ±10% of reading from 0-10,000 ppm
90% of response within 5 seconds
Less than 40dB (A) at 10 ft (3 m)
32 to 122°F (0 to 50°C)
5 to 90% RH (non-condensing)
6,562 ft (2,000 m)
DC power pack, provides a minimum of 8 hours of operation
15 Watts maximum
3 indicator lights:
ON Green LED flashes during warm-up, then glows steadily during
normal operation
FAULT Yellow LED flashes when there is a system fault
ALARM Red LED flashes when the gas level is above its alarm setting
Internal audible alarm programmable for any of the following conditions:
OFF, FAULT/ALARM, ALARM
9.0 x 14.5 x 5.0 inches (229 x 368 x 127 mm)
Less than 9 lbs (4 kg) including battery
2 years from date of shipment
Description
Instruction 3015-9000 Rev 2
CO Monitor
2