Samsung SCH-R330 Series User Manual page 63

Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there
•
is an unexpected noise that spoils the recording, re-record that
sequence.
Only adapt digits if you are regularly having problems with digit dialing.
•
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always Reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
From the Voice Settings menu, select Digit Dialing
1.
Adapt Digits. Your phone displays text describing the
Adapt Digits process.
.
Press Your phone displays the first digit sequence and
2.
"Please say" plays through the speaker followed by the
four digits appearing in the display.
Wait for the beep and say the digits using your normal tone
3.
of voice. After a moment, the phone plays back the
recording and prompts "Did the recording sound ok?"
• If the recording was good, say "Yes."
• If you need to re-record, say "No."
If you say "No," the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you're satisfied with the recording.
After confirming that the recording sounds "ok", continue
4.
the recording process with the next set of digits.
After 10 sets of digits, the phone asks whether you want to
5.
do more adaptation.
If you answer "Yes," repeat steps 4 and 5 for another 10
sets of digits. After the second group of 10 sets of digits,
"Adaptation complete" plays through the speaker and
you are returned to the Digit Dialing menu.
Reset Digits
➔
To reset digit dialing to factory default settings, do the following:
From the Voice Settings menu, select Digit Dialing
1.
Reset Digits. The phone prompts you to confirm digit
reset.
Press OK to reset your digit adaptation, or press Back to
2.
cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
From the Voice Settings menu, select Sound. The following
1.
options appear in the display:
• Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
➔
Tools 60